- License and Copyright
- Copyright © 2002–2022 Open Design Alliance. All rights reserved.
- Information in these materials is furnished for informational use only, is subject to change without notice and does not represent
a commitment on the part of Open Design Alliance. Open Design Alliance assumes no responsibility or liability for any errors or
inaccuracies that may appear in these materials. Use these materials at your own risk. Except as may be permitted by the license
agreement with, or other written permission received from, Open Design Alliance, no part of these materials may be reproduced,
republished, transmitted or distributed in any form.
- TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, OPEN DESIGN ALLIANCE AND ITS SUPPLIERS DISCLAIM ANY AND ALL WARRANTIES AND CONDITIONS,
EITHER EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE,
AND NON-INFRINGEMENT, AND THOSE ARISING OUT OF USAGE OF TRADE OR COURSE OF DEALING, CONCERNING THESE MATERIALS. THESE MATERIALS ARE PROVIDED
"AS IS" WITHOUT WARRANTY OF ANY KIND.
- TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL OPEN DESIGN ALLIANCE OR ITS SUPPLIERS (OR THEIR RESPECTIVE AGENTS,
DIRECTORS, EMPLOYEES OR REPRESENTATIVES) BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, CONSEQUENTIAL, INCIDENTAL,
DIRECT, INDIRECT, SPECIAL, ECONOMIC, PUNITIVE OR SIMILAR DAMAGES, OR DAMAGES FOR LOSS OF BUSINESS PROFITS, LOSS OF GOODWILL, BUSINESS
INTERRUPTION, COMPUTER FAILURE OR MALFUNCTION, LOSS OF BUSINESS INFORMATION OR ANY AND ALL OTHER COMMERCIAL OR PECUNIARY DAMAGES OR LOSSES)
ARISING OUT OF THE PURCHASE OR USE OF THESE MATERIALS, HOWEVER CAUSED AND ON ANY LEGAL THEORY OF LIABILITY (WHETHER IN TORT, CONTRACT OR
OTHERWISE), EVEN IF OPEN DESIGN ALLIANCE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY.
Because some jurisdictions do not allow the exclusion or limitation of liability for consequential or incidental damages, the above
limitation may not apply to you.
- All trademarks, trade names or company names referenced herein are used for identification only and are the property of their respective owners.
- US Government Restricted Rights: These materials are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the Government
is subject to restrictions as set forth in subparagraph (c)(1)(ii) of The Rights in Technical Data and Computer Software clause at
DFARS 252.227-7013 or subparagraphs (c)(1) and (2) of the Commercial Computer Software-Restricted Rights at 48 CFR 52.227-19, as applicable.
The contractor/manufacturer is Open Design Alliance, 10115 E Bell Road, Suite 107 #447 Scottsdale, AZ 85260, USA.
- Open Design Alliance License Agreement
- Open Design Alliance software and its documentation and related materials are owned by Open Design Alliance.
The software may only be incorporated into application programs owned by current members of Open Design Alliance,
subject to a signed Membership Agreement with Open Design Alliance. The structure and organization of the software
are the valuable trade secrets of Open Design Alliance and its suppliers. The software is also protected by copyright
law and international treaty provisions. Application programs incorporating the software must include the following
statement with their copyright notices:
- This application incorporates Open Design Alliance software pursuant to a license agreement with Open Design Alliance.
- Open Design Alliance Copyright © 2002–2022 by Open Design Alliance. All rights reserved.
- By use of the software, its documentation or related materials, you acknowledge and accept the above terms.
- Acknowledgements
- PDFium
- Open Design Alliance software contains a modified version of the PDFium library(https://pdfium.googlesource.com/pdfium/).
- Copyright 2014 PDFium Authors. All rights reserved.
- Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
- Neither the name of Google Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- Freetype
- Open Design Alliance software contains a modified version of the Freetype font library from the Freetype Project.
- The Freetype library is copyright © 2011 The FreeType Project(www.freetype.org). All rights reserved.
- ODA modifications to this library include porting changes required to get the code to build on various platforms.
- An exact list of these changes can be found in the Oda_freetype_changes.patch file in the top level freetype source.
- CMake
- Open Design Alliance software includes CMake - Cross Platform Makefile Generator, Copyright 2000-2009 Kitware, Inc., Insight Software Consortium, all rights reserved.
- Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
- Neither the names of Kitware, Inc., the Insight Software Consortium, nor the names of their contributors may be used to endorse or promote products derived from this software without specific prior written permission.
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- TinyXML
- Open Design Alliance software includes libraries built from a modified version of TinyXML (www.sourceforge.net/projects/tinyxml).
- TinyXML modifications include only minor porting changes.
- ZLib
- Open Design Alliance software includes libraries built from a modified version of zlib (http://zlib.net/).
- Zlib modifications include only minor porting changes.
- Gdtoa
- Open Design Alliance software includes the gdtoa library.
- Copyright (C) 1998, 1999 by Lucent Technologies
- All Rights Reserved
- Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all copies and that both that the copyright notice and this permission
notice and warranty disclaimer appear in supporting documentation, and that the name of Lucent or any of its entities not be used in
advertising or publicity pertaining to distribution of the software
without specific, written prior permission.
- LUCENT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS.
IN NO EVENT SHALL LUCENT OR ANY OF ITS ENTITIES BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- DWF Toolkit
- Open Design Alliance software includes a modified version of the DWF Toolkit from Autodesk.
- The modifications are mostly simple porting changes, and the exact list of modifications can be found at:
- https://www.opendesign.com/guestfiles/dwf_toolkit.
- This product is offered as-is without warranty of any kind, and is subject to limitations contained in the license from Autodesk located here:
- http://usa.autodesk.com/adsk/servlet/item?siteID=123112&id=5522878.
- The Independent JPEG Group's JPEG software
- Open Design Alliance software includes a modified version of the Independent Jpeg Group’s free Jpeg library.
- The modifications are porting changes required to get the library working on unsupported platforms.
- A full list of the changes made can be found in the Oda_Jpeg_Changes.patch file contained in the same directory as the JPEG source code.
- FreeImage
- Open Design Alliance software includes a modified version of the FreeImage open source image library.
- FreeImage was designed and implemented by Floris van den Berg. FreeImage is subject to the FreeImage Public License Version 1.0 (the "FreeImage License");
- you may not use this software except in compliance with the FreeImage License.
- You may obtain a copy of the FreeImage License at http://freeimage.sourceforge.net/freeimage-license.txt.
- Software distributed under the FreeImage License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.
- See the FreeImage License for the specific language governing rights and limitations under the FreeImage License.
- DWG
- DWG is the native and proprietary file format for Autodesk® AutoCAD® and a trademark of Autodesk, Inc.
- Open Design Alliance is not associated with Autodesk.